Remote Control Button Function - SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP Series User Manual

Remote Control Function:
You could use the IR infrared remote control to preset channel selection. Using the IR
remote control aim to the front panel of receiver or external IR receiver cable will be ok.
Initial at first time use the remote control or after change battery of remote control, the IR
remote control and the equipment Remote ID must be using same ID. The default
Remote ID for transmitter is 7, for receiver is 8.
To setting the Remote ID, Press and hold power button, then press button 8 to complete
the setting.

Remote Control Button Function:

Symbol Button
POWER
MENU
UP
DOWN
LEFT
RIGHT
ENTER
ASTERISK
NUMBER
A
B
1
2
3
4
5
6
7
8
9
0
+ .(for example)
Receiver Function
Turn Off/On Video Output
Menu selection, input numbers after press menu button
Enter / Show Channel Information
(When no other Menu operation)
Favorite Channel Switching
Back to Previous Channel
Connect/Disconnect Receiver
Setup Remote Control ID
Increase Value
Reduce Value
Carry
Decomposition
Cancel
Recall Previous Value
Number 1
Number 2
Number 3
Number 4
Number 5
Number 6
Number 7
Number 8
Number 9
Number 0
Transmitter Function
Enter
Not Available