Definition Of Keys - Digital Dream DDCS V2.1 User Manual

3. Parameter Value
The Parameter Value column lists the value of each Parameter. This value can be configured
4. Parameter Unit
The Parameter Unit lists the unit of each parameter.
3.2

Definition of Keys

The picture 3-4 shows the key layout of the DDCS V2.1. The Controller DDCS V2.1 has 17 keys. Please
see table 3-1 for reference.
Keys Icon Function No.
Digtital Dream 4 Axis Motion Controller
Picture 3-4
Definition
1 Start operation
1 Pause operation
1 Reset and E-STOP
1 Page switch
1 Toolpath display switch
1 Spindle manual start/close
Keys Layout
After loading the G code file, please press this key
to start the operation. In case of Pause Status,
press this key to continue the processing operation.
Press this key to Pause the operation.
If Reset is blinking, press this key to activate the
controller. Press this key to stop processing urgently.
Switch through File Management Page, Processing
Main Page and Parameter Configuration Page.
Switch the display between Coordinate Display or
Tool Path Tracking display.
Press this key to manually switch the spindle on or
off. Can not be used if Reset is blinking and while
processing an operation (Busy)
Page -19
Notes
DDCS V2.1 User's Manual