Set Delay Time; Set Attenuator; Set Record; Assigning A Search Range To A Search Key - Uniden Trunk Tracker IV BCD996T User Manual

Edit Service
 S elect a service range:
Public Safety, News, HAM Radio, Marine, Railroad, Air, CB Radio, FRS/GMRS, Racing, TV Broadcast,
FM Broadcast, Military Air, Special
Method Two
◙
+ [SCAN/SEARCH]
(Func)
Quick Search? Yes=E" / No="."
Press [.No] then to Edit Service
At this point you can edit each of the settings that comprise each custom search range.
The following show you how to set the various option settings associated with a Service. For each, your starting operation is
[MENU]
Search for ...
Edit Service
 S elect a service range:

Set Delay Time

to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off.

Set Attenuator

to select to choose an attenuation for all frequencies in the range.
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.

Set Record

to select to enable a live audio output from REC to an audio recording device.
On — the scanner outputs the signal.
Off — the scanner does not output any audio.

Assigning a Search Range to a Search Key

You can assign any of the Service or Custom Searches to the six Search keys for quick access to your favorite searches.
[MENU]
Search for ...
◙
Set Search Key
Select the key to assign
Select a search range
[MENU]
Search for ...
Now, to access that search, hold on any channel, then press
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
SRCH 4: FRS/GMRS
◙
◙
.
◙
◙
◙
◙
◙
◙
◙
◙
◙
and the number key [1] to [6] corresponding to the search range.
50
◙
◙