Searching And Storing; Service Search - Uniden Trunk Tracker IV BCD996T User Manual

Alert 1 - 9 the scanner sounds an alert beep to notify you that the channel has become active. You can choose any of 9 different
beep types. Once you choose an alert tone, then:
◙
Set Level
Auto - the scanner automatically sets the channel alert beep to match the master volume level.
Level 1 - 15 - the scanner adjusts the volume of the beep to the level you select.

Searching and Storing

Service Search

Service Search lets you select and search the scanner's preprogrammed search ranges. During service search, the scanner
searches starting with the lowest frequency in the search range you select to the highest frequency in the range. There are two ways
to do this.
◙
[MENU]
Search for ...
◙
Service Search
◙
Select the service search range
The other approach is:
◙ ◙
+ [SCAN.SEARCH]
Quick Search? Yes=E" / No="."
◙
Press [.No] then to select Service Search
The following search ranges appear as you scroll
Public Safety
News
HAM Radio
Marine
Railroad
Air
CB Radio
FRS/GMRS
Racing
TV Broadcast
FM Broadcast
Military Air
Special
The scanner searches the service you selected, stopping on any transmission it finds and displaying the frequency. Turn the Scroll
Control to change the search direction. An arrow appears, showing the current search direction.
◙ +
To pause searching, press [HOLD/RESUME]. To resume searching, press then press [SCAN/SEARCH]. Or, press
[HOLD/RESUME].
To lock out a frequency found while searching, press [L/O]. Locked Out appears and the scanner resumes service search.
Notes:
47