◙
On —
to select.
◙
Off —
to select.
to select either on or off specifically for receiving digital channels.
Digital
◙
On — Press
to select.
◙
Off — Press
to select.
Setting the Display Orientation
◙
[MENU]
Settings
This setting controls the orientation of the display. If you set Upside-down to On, the scanner inverts the display text and graphics.
Adjusting the Display Contrast
There are 15 contrast levels. As you scroll from level 1 o 15 you see the contrast change. Press the Scroll Control to lock the
desired level until the time you desire to change it.
[MENU]
Settings
Setting the GPS Format
◙
[MENU]
Settings
These settings control how the scanner handles GPS input when you are using the location-based functions.
Setting the Position Format
◙
[MENU]
Settings
This setting controls the format used for entering GPS coordinates into the scanner.
DMS: DDD MM SS.ss – Enter the location in Degree, Minute, Second format.
DEG: DDD.dddddd – Enter the location in Degree and fraction format.
Setting the Time Format
◙
[MENU]
Settings
This setting controls the format used for displaying the time on the GPS data screens.
12H – the scanner displays time in 12-hour format using am for mornings and pm for evening times.
24H – the scanner displays time in 24-hour format using 0 for midnight and 23 for 11 pm.
Setting the Time Zone
◙
[MENU]
Settings
This setting controls the format used for adjusting Universal time to local time. Set your local time's offset from UTC (formally known
as GMT).
Setting the Distance Units
◙
[MENU]
Settings
This setting controls the distance units shown in the GPS data screens and used for entering distance for POI's
mile – The scanner uses miles.
◙
Set Upside-down
◙
Adjust Contrast
◙
Set GPS Format
◙
Set GPS Format
◙
Set GPS Format
◙
Set GPS Format
◙
S et GPS Format
◙
Select a level
Level 1 to...Level 15
◙
◙
Set Position Format
◙
◙
S et Time Format
◙
◙
S et Time Zone
◙
◙
S et Pos Format
25
◙
◙