Uniden Trunk Tracker IV BCD996T User Manual page 66

Improper reception.
Scan won't stop.
Scan won't start.
Weather scan doesn't
work.
If you experience difficulty while in TrunkTracker™ mode, try the following steps.
The antenna might need to be
adjusted.
The squelch might need to be
adjusted.
The antenna might need to be
adjusted.
One or more channels might
be locked out.
The channel's frequency
might not be stored in
memory.
The channel might not be
active.
You must press
[SCAN/SEARCH] to scan.
The squelch might need to be
adjusted.
One or more channels might
be locked out.
The antenna might need to be
adjusted.
The squelch might need to be
adjusted.
The antenna might need to be
adjusted.
There might not be a NOAA
weather broadcast in your
area.
If there is a wall switch that
controls power to the AC
outlet where you connected
the AC adapter, make sure it
is on.
Check the antenna
connection or move or
reposition the antenna.
Move the scanner.
You might be in a remote
area that could require an
optional multi-band antenna.
Check with your dealer or
local electronics store.
Adjust the squelch threshold.
See "Turning On the
Scanner and Setting the
Squelch" on Page XX.
Check the antenna
connection.
Make sure the channels you
want to scan are not locked
out.
Make sure the channel's
frequency is stored in the
scanner's memory.
Wait for a transmission on
the channel.
Press [SCAN/SEARCH].
Adjust the squelch
threshold. See "Turning On
the Scanner and Setting
the Squelch" on Page XX.
Make sure the channels
you want to scan are not
locked out.
Check the antenna
connection.
Adjust the squelch
threshold. See "Turning On
the Scanner and Setting
the Squelch" on Page 42.
Check the antenna
connection.
Move to an area with a
NOAA weather broadcast.
66