Set Physical Address; Set Baud Rate; Set Date; Set Time - Comtech EF Data XSAT-7080 Series Installation And Operation Manual

XSAT7080 X-Band Transceiver
System Operation
3.3.18 S P
ET HYSICAL
The Remote (Physical) address to which the XSAT will respond can be set to any value
between 0001 and 9999. (The factory default is 0001)
Associated Remote Command(s):
3.3.19 S B
ET AUD
The Baud Rate of the communication port, J5, can be set to any values shown below:
1200, 2400, 4800, 9600, 19200, 38400 (The factory default is 9600)
Associated Remote Command(s):
3.3.20 S D
ET ATE
The XSAT contains a battery powered Real Time Clock (RTC) used to provide
Date/Time stamping of events, alarms and faults. The date can be changed by the user.
Associated Remote Command(s):
3.3.21 S T
ET IME
The XSAT contains a battery powered Real Time Clock (RTC) used to provide
Date/Time stamping of events, alarms and faults. The time can be changed by the user.
Associated Remote Command(s):
A
DDRESS
R
ATE
SPA=
SBR=
DAY=
TIM=
3–9
Revision 0
MN/XSAT7080.IOM