Rf Signal Conversion; Downconverter; Figure 6-1. Functional Block Diagram Of The Downconverter Section - Comtech EF Data XSAT-7080 Series Installation And Operation Manual

XSAT7080 X-Band Transceiver
Theory of Operation
6.1 RF S
IGNAL
6.1.1 D
OWNCONVERTER
The RF input to the downconverter is in the 7250 to 7750 MHz frequency range at a typical level
of -45 dBm. The input signal is mixed down to the 1590 MHz IF in the first conversion mixer.
High side LO injection is used for this mixing process. It is provided by the downconverter RFLO
synthesizer in the 4510 to 5310 MHz frequency range in 1.000 or 2.500 MHz steps. Both step
sizes are automatically selectable.
IF filtering is provided by the 1590 MHz BPF. It is just wide enough to pass the 36 MHz
bandwidth of the desired signal while maintaining more than adequate amplitude and group delay
flatness. At the same time, it is narrow enough to provide the necessary rejection to the image, the
RFLO, and other spurious signals. The second mixer operates at a fixed input frequency of 1590
MHz. It operates with high side LO injection at 1180 MHz provided by the downconverter IFLO
and converts the IF signal down to the 70 ±18 MHz output frequency.

Figure 6-1. Functional Block Diagram of the Downconverter Section

C
ONVERSION
6–2
Revision 0
MN/XSAT7080.IOM