XSAT7080 X-Band Transceiver
50 and 100-Watt Installation
B.6.2.2 A
SSEMBLE
Step
1
2
3
4
5
6
7
R
C
EDUNDANT
ONFIGURATION
Procedures
Place Unistrut bracket (1, Figure B-1) on a flat surface. (see Figure B-19.)
Slide two springnuts (9) into the channel of the Unistrut bracket.
Fasten two pipe blocks (11) loosely to the springnuts using two bolts (6), two
flat washers (7), and two splitlock washers (8).
Repeat procedure for second Unistrut bracket (1)
Position Unistrut bracket (1) with pipe blocks (11) against the mounting pole,
slide the pipe blocks (11) until they contact the mounting pole. (see Figure
B-20.)
Ensure the pipe blocks (11) are centered to the Unistrut brackets (1). (see
Figure B-21.)
Tighten the hardware.
Figure B-19. Preparing the Pole Bracket
B–22
Revision 0
MN/XSAT7080.IOM