Chapter 2. Specification - Comtech EF Data XSAT-7080 Series Installation And Operation Manual

XSAT7080 X-Band Transciever
Specification
Common
Conversion Dual, No Spectral Inversion
Frequency 1 and 2.5 MHz automatic
Step Size
-9
Frequency ± 1 x 10
/day
Stability -7
1 x 10 /day
40° to 55°C 1 x 10
Attenuation TX
Steps
RX
Phase 100 Hz
Noise
1 kHz
10 kHz
100 kHz
Group Linear
Delay
Parabolic
Ripple
Monitor & Control
Methods Both RS-485 and RS-232 Serial
Interface Handheld controller, optional
Commands Set TX frequency
Set RX frequency
Set TX attenuation
Set RX attenuation
Report TX output power
Mute TX
Report internal temperature
Report power supply voltages
Set time
Set date
Faults Upconverter functions
Downconverter functions
Upconverter Synthesizers
Downconverter Synthesizers
Internal Reference Oscillator
LNA current fault
Overtemperature condition
-8
/ Temp
0 to 25 dB, in 0.25 dB steps
0 to 20 dB, in 0.25 dB steps
-66 dBc/Hz
-76 dBc/Hz
-86 dBc/Hz
-96 dBc/Hz
0.1 ns/MHz
2
0.02 ns/MHz
1 ns/p-p
2–2
Environmental
Temperature:
Operating
-40 to +55°C (-40 to 131°F)
Non-Operating
-50 to +75°C (-58 to 167°F)
Attitude 15,000 Feet, mean sea level
Humidity 0 to 100 %, Relative
Prime Power 90 to 260 VAC Standard
47 to 63 Hz Standard
48 VDC Optional
Dimensions:
5 to 25W 11H x 8W x 11D inches
(28H x 20W x 28D cm)
50W 9.75H x 10W x 23d inch
(25H x 25W x 58D cm)
100W 10.60H x 12.5W x 26D inches
(27H x 32W x 66D cm)
Weight:
5 to 25W 36 lbs (16 kg)
50W 65 lbs (29 kg)
100W 80 lbs (40 kg)
Low Noise Amplifier Customer defined
Model:
RF Power 5W 10W
AC Power 165W 220W
Revision 0
MN/XSAT7080.IOM
25W 50W 100W
275W 450W 825W