Menu Settings; Changing Menu Item Settings - Sony HDCU3100 Operating Instructions Manual

Menu Settings

The CCU system and peripheral settings can be checked and
modified using a video monitor connected to the PIX
connector.

Changing Menu Item Settings

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel. Setting the CANCEL/
ENTER lever to the ENTER position and pressing the
CONTROL knob perform the same function.
DISP/MENU lever and indicator
CANCEL/ENTER lever
CONTROL knob
To display a menu page
Set the DISP/MENU lever to the MENU position.
When first powered on, the CCU MENU page is displayed.
When <OUTPUT FORMAT1> t SDI-OUIT4 t MONITOR is
set to C (characters are not added), you can hold the DISP/
MENU lever in the MENU position for 3 seconds to force
display of the CCU MENU.
To display the CCU MENU page
In menu display mode, turn the CONTROL knob to move the
pointer (,) to TOP in the upper right corner of the menu
page, then press the CONTROL knob. The CCU MENU
showing the menu configuration is displayed.
* * C C U M EN U * *
S Y S T EM C ON F IG
V I D E O/ M ON I TO R
A U D I O/ I NT E RC OM
M A I N TE N AN C E
F I L E
N E T W OR K
D I A G NO S IS
Menu name
SYSTEM CONFIG
VIDEO/MONITOR
AUDIO/INTERCOM
MAINTENANCE
FILE
Description
Input/output signal format and
system-related settings
Video-related settings
Audio- and intercom-related
settings
CCU configuration settings
CCU file-related settings
Menu name
NETWORK
DIAGNOSIS
To select an item in the CCU MENU
Turn the CONTROL knob to move the pointer (,) to the
desired menu item, then press the CONTROL knob. The most
recently viewed page in the selected menu is displayed.
To change the displayed page
1
Turn the CONTROL knob to move the pointer (,) to the
page number, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
<CA MERA I/F >
CA BLE TYPE : FIB ER C AMER A CA BLE
FI BER TRAN SMIT RATE : H IGH
OP TICA L SI GNAL
BA RS : OFF
TE ST : TES T1
ST ARTU P VI DEO S IGNA L: G RAY
2
Turn the CONTROL knob to change the displayed page
to the desired page, then press the CONTROL knob.
The question mark (?) changes back to the pointer (,).
Items on the page can now be selected and changed.
To change a menu item setting
If a question mark (?) is displayed beside the page number,
press the CONTROL knob to restore the pointer (,). Items
on the page can now be selected and changed.
1
Turn the CONTROL knob to move the pointer to the
desired item, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
2
Turn the CONTROL knob to change the setting.
To cancel a changed setting
Set the CANCEL/ENTER lever to the CANCEL position
before pressing the CONTROL knob. The item is restored
to its current setting.
To suspend menu changes
Set the DISP/MENU lever to the MENU position to exit the
menu screen.
The DISP/MENU lever can be set to the MENU position
again to restart the operation.
3
Press the CONTROL knob.
The question mark (?) changes back to the pointer (,),
and the item setting is registered.
11
Description
Network-related settings
Displays the unit status.
Flashing
?S01 TOP
: O FF