Sony HDCU3100 Operating Instructions Manual page 18

SYSTEM CONFIG
Page name Item
Page No.
<MULTI FORMAT> SYSTEM
S05
CAMERA FORMAT
BIT DEPTH
FRAME CONVERT
DELAY
HD-SD DELAY
<OUTPUT FORMAT1> SDI-OUT1
S06
SDI-OUT2
Set value
1.001(525), 1.000(625)
When 1.001(525) is selected in
SYSTEM:
1080/59.94P, 1080/59.94I, 1080/
29.97PsF, 1080/23.98PsF, 720/
59.94P, 1080/59.94I (RGB444),
1080/29.97PsF (RGB444), 1080/
23.98PsF (RGB444), 1080/
59.94I(2x), 720/59.94I(2x)
When 1.000(625) is selected in
SYSTEM:
1080/50P, 1080/50I, 1080/25PsF,
1080/24PsF, 720/50P, 1080/50I
(RGB444), 1080/25PsF (RGB444),
1080/24PsF(RGB444), 1080/
50I(2x), 720/50I(2x)
10BIT, 12BIT
0.8, 1.2, 1.6 F@23.98PsF
LINE, FRAME
MONITOR C
FORMAT See "Formats settable for the SDI
OUT / SDI-I/O connectors"
(page 21).
OETF SDR
COLOR BT709
MONITOR C
FORMAT See "Formats settable for the SDI
OUT / SDI-I/O connectors"
(page 21).
OETF SDR
COLOR BT709
Description
Selects the operating frequency of the system.
Selects the format of the system.
Sets the RGB4:4:4 output bit length, and changes
the CCU output format.
This can be selected only when CAMERA FORMAT
is set to 1080/59.94I (RGB444), 1080/29.97PsF
(RGB444), 1080/23.98PsF (RGB444), 1080/50I
(RGB444), 1080/25PsF (RGB444), or 1080/24PsF
(RGB444).
Sets the video delay time when 2-3 Pulldown.
This is enabled only when SYSTEM is 1.001 (525).
Sets the phase output for SD signals down-
converted from HD signals.
The delay duration display will be as follows when
CAMERA FORMAT is set to a 1080 format.
When LINE is selected: 90H
When FRAME is selected: 1FRAME
The delay duration display will be as follows when
CAMERA FORMAT is set to a 720 format.
When LINE is selected: 120H
When FRAME is selected: 2FRAME
Sets the output for the SDI-OUT 1 connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed at C.
Sets the output signal format for the SDI-OUT 1
connector.
Sets the gamma curve of the video output.
Selects the color space of SDI-OUT1 video output.
BT709: Sets the color output format to BT709.
Sets the output for the SDI-OUT 2 connector.
Sets whether to add characters to the output signal.
C: Characters are not added.
Note
This is fixed at C.
Sets the output signal format for the SDI-OUT 2
connector.
Sets the gamma curve of the video output.
Selects the color space of SDI-OUT2 video output.
BT709: Sets the color output format to BT709.
18