Sony HDCU3100 Operating Instructions Manual page 27

MAINTENANCE menu
MAINTENANCE
Page name Item
Page No.
<TRUNK/PROMPTER> TRUNK LINE
M01
PROMPTER
NETWORK TRUNK
HD TRUNK
HD PROMPTER
<MENU SETTINGS> PAGE RESUME
M02
ALARM JUMP
CAMERA MENU
CTRL
<DATE&TIME> DATE (YEAR)
M03
DATE (MONTH)
DATE (DAY)
TIME (HOUR)
TIME (MINUTE)
TIME ZONE (HOUR)
TIME ZONE
(MINUTE)
<TALLY INPUT> R-TALLY
M04
G-TALLY
Y-TALLY
Set value
CHANNEL MODE When FIBER TRANSMIT RATE is
set to HIGH: 2CH(MAX 75Kbps),
1CH(MAX 150Kbps)
When FIBER TRANSMIT RATE is
set to HD: 1CH(MAX 38Kbps)
INTERFACE 232C, 422A
CHANNEL MODE 2CH, 1CH
MODE OFF, NETWORK,
NETWORK+VIDEO
DATA RATE 100Mbps, 1Gbps
CAMERA (ENABLE), (DISABLE)
(ENABLE), (DISABLE)
(ENABLE), (DISABLE)
FRAME SYNC OFF, ON, (ON)
ON, OFF
ON, OFF
OFF, ON
15 to 99
1 to 12
1 to 31
0 to 23
0 to 59
–23 to +23, 0
0 to 59
CONTACT, POWER(24V),
POWER(TTL)
CONTACT, POWER(24V),
POWER(TTL)
CONTACT, POWER(24V),
POWER(TTL)
Description
Sets the number of channels to be used.
Sets the communication line mode.
When FIBER TRANSMIT RATE is set to HD, this is
fixed at 422A.
Sets the number of prompter lines.
Sets the mode for the network trunk.
OFF: NETWORK TRUNK is not used.
NETWORK: NETWORK TRUNK is used (maximum
1 Gbps).
NETWORK+VIDEO: NETWORK TRUNK is used at
the same time as HD TRUNK/HD PROMPTER
(maximum 100 Mbps).
Displays the data transfer rate. (Display only)
Displays "ENABLE" or "DISABLE" for CAMERA.
(Display only)
Displays "ENABLE" or "DISABLE" for HD TRUNK.
(Display only)
Displays "ENABLE" or "DISABLE" for HD
PROMPTER. (Display only)
Turns the frame synchronizer function ON/OFF.
Turns ON/OFF the menu mode resume page display
function.
Turns ON/OFF the error-related page display
function for when an error occurs while in menu
mode.
Displays the Camera menu.
Note
• If CAM MENU is set to ON, CCU menu operations
cannot be performed because only Camera menu
operations are available.
• The Camera menu is not displayed when SD
signal is output.
Sets the date and time.
Note
When this is changed, all logs stored on the unit will
be deleted.
Sets the time zone.
RED tally input setting
GREEN tally input setting
YELLOW tally input setting
27