Specifications - Sony HDCU3100 Operating Instructions Manual

Specifications

General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 4.5 A (max.)
Operating 5 °C to 40 °C (41 °F to 104 °F)
temperature
Storage temperature –20 °C to +60 °C (–4 °F to +140 °F)
Mass Approx. 7.3 kg (16 lb. 1.5 oz.)
Dimensions (Unit: mm (inches))
3
424 (16 /
3
465 (18 /
482 (19)
Input/output connectors
CAMERA FIBER Optical fiber connector (1)
INTERCOM/TALLY/ D-sub 50-pin connector (1)
IO PORT
• INTERCOM (PROD/ENG), 4W: 0 dBu,
RTS: 0 dBu, CC: –14 dBu
• PGM, 2 systems, 0 dBu/–20 dBu
• TALLY (R, G, Y)
• FLAG
RCP/CNU 8-pin multi-connector (1)
TRUNK 12-pin (1)
LAN-COM 8-pin (1)
NETWORK TRUNK 8-pin (1)
SDI I/O 1 to 4 3G/HD/SD SDI I/O
BNC-type (4)
3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p,
75 ohms, 270 Mbps
3G-SDI/HD-SDI/SD-SDI, character signal
selectable
)
4
)
8
REFERENCE IN/OUT BNC-type (2), loop-through output
HD: SMPTE ST274, tri-level sync, 0.6 Vp-
p, 75 ohms
SD: Black burst (NTSC: 0.286 Vp-p,
75 ohms/PAL: 0.3 Vp-p, 75 ohms) or
NTSC 10F-BB
Input connectors
AC IN 100 V to 240 V AC (1)
SDI RET 1 to 4 BNC-type (4)
3G-SDI: SMPTE ST424/425, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 1.485 Gbps/
1.4835 Gbps
SD-SDI: SMPTE ST259, 270 Mbps
PROMPTER 1 BNC-type (2), loop-through output during
1CH mode, terminate internally at 75 ohms
PROMPTER 2/VBS-
during 2CH mode, analog signal, 1.0 Vp-p,
RET
75 ohms
Output connectors
AUDIO OUT CH1, XLR 3-pin, male (2), 0 dBu/–20 dBu/
CH2 +4 dBu
CHARACTER/ABS/ BNC-type (1), VBS, 1 Vp-p, 75 ohms
EBU
HD SYNC: BTA-S001, tri-level sync,
0.6 Vp-p, 75 ohms
SD SYNC: composite sync, 0.3 Vp-p,
75 ohms
VBS/HD SYNC/SD SYNC selectable
SDI OUT 1 to 4 3G/HD/SD SDI OUTPUT
BNC-type (4)
3G-SDI: SMPTE ST424/425 Level-A/B,
0.8 Vp-p, 75 ohms, 2.970 Gbps/
2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
SD-SDI: SMPTE ST259, 0.8 Vp-p,
75 ohms, 270 Mbps
3G-SDI/HD-SDI/SD-SDI, character signal
selectable
Supplied accessories
Number plates (1 set)
Before Using this Unit (1)
Operating Instructions (CD-ROM) (1)
Optional accessories
United States and Canada: Power cord set (1-551-812-XX)
Other areas: Power cord set (1-782-929-XX)
United States and Canada: Plug holder B (2-990-242-01)
Other areas: Plug holder C (3-613-640-01)
CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection
Cable (10 meters)
Service Manual
Related devices
HDC2000 HD Color Camera
HDC2580/2500/2400/1700 HD Color Camera
HSC300RF/100RF HD Color Camera
BPU4000/4500 Baseband Processor Unit
RCP-1000 series Remote Control Panel
MSU-1000 series Master Setup Unit
Design and specifications are subject to change without
notice.
32