Drive Unit - Canon DADF-M1 Service Manual

Chapter 3
3.3.4.4 Removing the
Locking Motor
1) Remove the 2 screws [1].
F-3-18
2) Remove the 2 screws [1], and
disconnect the connector [2]; then, detach
the delivery reversal motor [3].
[3]
[2] [1]
F-3-19
When mounting it, be sure that the
motor harness is not trapped.
3-8
0003-7180
[1]

3.3.5 Drive Unit

3.3.5.1 Removing the
Rear Cover
Refer to Procedure 3.2.2
3.3.5.2 Removing the
Harness Guide (right
rear)
Refer to Procedure 3.3.3.2
3.3.5.3 Removing the
Delivery
Motor Unit
1) Remove the 2 screws [1], and detach the
delivery reversal motor unit [2].
[2]
F-3-20
0004-0691
0004-0818
Reversal
0004-0693
[1]