Document Feeding/Delivery; Basic Sequence Of Operation - Canon DADF-M1 Service Manual
Hide thumbs
Also See for DADF-M1:
- Service manual (160 pages) ,
- Portable manual (70 pages) ,
- General timing chart/general circuit diagram (16 pages)
Table of Contents
Advertisement
Chapter 2
2.6 Document Feeding/Delivery
2.6.1 Basic Sequence of Operation
0002-9828
a. Moving the Originals
The machine turns on the locking solenoid before the trailing edge of the original leaves
the platen downstream roller to lock the delivery reversing roller in place. It then accelerates
the delivery reversal motor when the trailing edge of the original leaves the platen
downstream roller for delivery.
The machine uses the following sequence of operation to deliver the original when the host
machine finishes reading it:
M2
M3
Delivery reversal
Upper roller
Read roller 2
Delivery reversal
Lower roller
Platen Roller
F-2-36
2-43
Advertisement
Table of Contents
