3.5.6 Read Sensor
3.5.6.1
Removing the
Front Cover
Refer to Procedure 3.2.1
3.5.6.2
Removing the
Feed Guide
Refer to Procedure 3.4.9.10
3.5.6.3
Removing the
Read Sensor
1) Remove the 2 screws [1], and
disconnect the connector [2]; then, detach
the read sensor [3].
[1]
[2]
F-3-76
If you have replaced the sensor PCB,
be sure to perform sensor adjustment.
0004-0535
0004-5588
0004-0541
[3]
3.5.7 Delivery Reversal Sensor
3.5.7.1
Removing the
Open/Close Guide
Refer to Procedure 3.4.16.1
3.5.7.2
Removing the
Delivery Guide
1) Remove the 2 screws [1], and detach the
delivery guide [2].
Chapter 3
0004-0731
0004-0603
3-31