Canon DADF-M1 Service Manual page 100

Chapter 3
3.5.2.3 Mounting
Original
Volume
1) Move the side guide [1] as wide as
possible.
[3]
[1]
F-3-68
2) Turn the
counterclockwise, and mount it so that the
arrows [3] match.
If you have replaced the original width
volume, be sure to adjust the position of the
side guide plate.
3.5.2.4 Adjusting
Side Guide Plate
Adjusting the Side Guide Plate of the
ADF Pickup Tray
1) Open the feeder cover, and detach the
3-28
the
Width
0004-0491
[1]
[2]
[3]
gear [2] fully
the
0004-9326
inside cover.
2) Remove the 3 mounting screws [1], and
detach the cover [2].
[2]
F-3-69
3) Loosen the mounting screw [1], and
remove the screw [2] from the positioning
hole; then, temporarily fit it in the
adjusting angular hole [3].
if A>1 mm, move the volume unit
[4] toward the front.
if B>1 mm, move the volume unit
[4] toward the rear.
[1]