Basic Adjustment; Overview; Adjustment - Canon DADF-M1 Service Manual

Chapter 4

4.3 Adjustment

4.3.1 Basic Adjustment

4.3.1.1 Overview

The machine's basic adjustments must be made in the following order:
[1] angle guide (angle of opening at 90 deg)
[2] tray width*1
[3] sensor output*1
[4] tilt
[5] height
[6] right angle
[7] angle guide (angle of opening at 70 deg)
[8] magnification*1
[9] horizontal registration*1
[10] leading edge registration*1
[11] white level*1
*1: adjustment made using the host machine's service mode.
Memo:
Be sure to make these basic adjustments whenever you have detached the machine or
replaced any of the parts indicated.
4-24
0003-1634