User Error Code; Alarm Code - Canon DADF-M1 Service Manual

Chapter 5

5.2 User Error Code

5.2.1 Alarm Code

The machine flashes the original detection LED at intervals of 240 msec when it identifies
a fault as being an alarm condition.
Code Fault
xx03 Separation has failed.
xx11 The number of jam recovery
sheets is greater than the
number of originals.
xx13 An original has been pulled out. The read sensor is off when the preceding original has
xx14 High-speed duplexing
operation fails.
5-4
T-5-3
Description
The 1st original does not reach the post-separation
sensor.
The 1st original does not reach the registration sensor.
In jam recovery mode, the tray runs out of originals
before as many as 'the number of recovery sheets - 1'
has been delivered.
been moved to a point of reading.
The original is longer than the specified limit.
0004-5177