Canon DADF-M1 Service Manual page 86

Chapter 3
3.4.5 No.1 Registration Roller
3.4.5.1 Removing the
Front Cover
Refer to Procedure 3.2.1
3.4.5.2 Removing the
Rear Cover
Refer to Procedure 3.2.2
3.4.5.3 Removing the
Locking
Harness Guide
1) Remove the screw [1], and disconnect
the 3 connectors [2]; then, detach the
harness guide [3].
[2] [1]
[2]
[3]
F-3-32
3.4.5.4
Removing the
Locking Solenoid
Refer to Procedure 3.5.3.2
3-14
0003-7208
0003-8035
Motor
0003-8036
[2]
0003-8038
3.4.5.5 Removing the
Delivery
Motor Unit
1) Remove the 2 screws [1], and detach the
delivery reversal motor unit [2].
[2]
F-3-33
3.4.5.6 Removing the
Pre-Registration
Guide
1) Remove the 2 screws [1], and detach the
pre-registration guide [2].
[1]
F-3-34
Reversal
0004-0386
[1]
0004-0432
[2]
[1]