Canon DADF-M1 Service Manual page 81

3.3.5.4 Removing the
Drive Unit
1) Remove the 4 screws [1], and detach the
drive unit [2].
Be sure to free the harness from the
wire saddle [3]. When mounting it, be sure
to route the harness through the wire saddle
[3].
F-3-21
After mounting it, check to make sure
that the arm [1] of the pickup clutch is
above the bin [2].
0004-0689
[1] [2]
[3]
[1]
[1] [2]
F-3-22
Chapter 3
3-9