KROHNE OPTIWAVE 7300 C Handbook page 38

Editing values
A value must be modified digit by digit. The cursor starts at its default position on the digit the furthest to the
left on the edit screen.
* Press right and up keys simultaneously
Online help
Unsure of the next step? Wait 15 seconds and a definition of the menu item will appear.
Return to the menu screen by pressing "Escape" (right and up keys).
1. Press "down" to read the end of the message
2. Menu reference number. Refer to section 4.2.3: Summary of menu items for a complete list
3. Press "up" to go back to the top of the message
1. Menu name
2. Function name
3. Parameter value with cursor on left digit
4. Minimum value
5. Maximum value
6. Status bar - "value too high" or "value too low"
message if value is respectively greater or less than
the parameter range
7. Picture of parameter
OPTIWAVE 7300 C
Handbook OPTIWAVE 7300 C
38