Field Communicator; Gateway; Ams; Figure 4-1 - Smart Wireless Gateway Devices Page - Emerson 56WM WirelessHART SensEnable Reference Manual

Reference Manual

4.3.2 Field Communicator

For 56WM communication with a Field Communicator, a 56WM DD is required. To obtain the latest
DD, visit the 475 Field Communicator System Software and Device Description site at
www.emerson.com/field-communicator.

4.3.3 Gateway

If the 56WM was configured with the Network ID and Join Key and sufficient time for network polling
has passed, the 56WM will be connected to the network. To verify device operation and connectivity
using the Smart Wireless Gateway's web based user interface, shown in Figure 4-1, navigate to the
Devices page. This page will also display the 56WM's tag, PV, SV, TV, QV, and Last Update time. Refer
to the Smart Wireless Gateway User Interface
parameters used in the Smart Wireless Gateway web based user interface.
Note
The time to join the new device(s) to the network is dependent upon the number of devices being
joined and the number of devices in the existing network. For one device joining an existing network
with multiple devices, it may take up to ten minutes. It may take up to 60 minutes for multiple new
devices to join an existing network.

Figure 4-1 - Smart Wireless Gateway Devices Page

4.3.4 AMS

For 56WM communication with AMS, a 56WM DD is required. To obtain the latest DD, visit the
Emerson Process
US/documentation/deviceinstallkits/Pages/deviceinstallkitsearch.aspx/
Management Easy
Manual Supplement for terms, user fields, and
Upgrade site at
December 2017
emersonprocess.com/en-
29