Table of Contents
Advertisement
Reference Manual
Section 5
5.1
Overview
The tables in this section provide summarized maintenance and troubleshooting suggestions for
the most common operating problems. If you suspect malfunction despite the absence of any
diagnostic messages on the Field Communicator display, follow the procedures here to verify the
56WM hardware and process connections are in good working order. Always deal with the most
likely checkpoints first.
5.2
Safety
Instructions and procedures in this section may require special precautions to ensure the safety of
the personnel performing the operations. Information that potentially raises safety issues is
indicated by a warning symbol (⚠). Refer to the following safety messages before performing an
operation preceded by this symbol.
WARNING! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
This product must only be installed or serviced by qualified electricians following safe electrical work practices.
▪
Installers and servicers of this device are responsible for conformance to all applicable codes, including NFPA 70E in
▪
the USA, and local codes.
Installers and servicers are responsible to confirm, with an appropriately rated voltage sensing device, that all power
▪
has been removed prior to installing or servicing this device.
This product must be installed inside a suitable fire and electrically rated enclosure.
▪
Do not install this device in a hazardous or classified location.
▪
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
This device may not cause harmful interference.
▪
This device must accept any interference received, including interference that may cause undesired operations.
▪
This device must be installed to ensure a minimum antenna separation distance of 20 cm from all persons.
▪
NOTICE
For technical assistance, call:
United States:
419-525-8307
Asia Pacific:
91-22-66620414
Europe and Latin America:
+1-419-525-8315
Troubleshooting
December 2017
30
Advertisement
Table of Contents
Troubleshooting
