Table of Contents
Advertisement
Installation manual
00825-0100-3814
4.3
Using a Field Communicator to configure
the meter
Important
Follow all guidelines and precautions described in the Field Communicator User
Manual and in the 3814 Liquid Ultrasonic Flow Meter documentation when
working in a hazardous area.
Prerequisites
•
Emerson Field Communicator software, license, installation guide and user
manual available on the One Emerson website:
catalog/ams-475-field-communicator
•
Rosemount HART Device Description (HART DD) installed for the meter
•
Network configured for a Field Communicator
•
System wiring diagram drawing number DMC-004936 (see
Drawings)
•
Power supply
Procedure
1. Remove electrical power to the meter. If installed, remove the end cap
2. Refer to the Field Communicator Users Manual wiring diagrams and
3. Fully charge the Field Communicator battery prior to use.
4. On the meter, run the wires through the field wiring conduit and into the
Rosemount 3814 Liquid Ultrasonic Flow Meter
changed and remains latched until acknowledged. Click Ack
(acknowledge) to clear the alarm.
security latches and seals and then, remove the end cap.
commissioning instructions provided with your handheld device. Register
the product to activate the end user license.
Important
Do not change the battery in a hazardous area environment. The power
supply is not intrinsically safe.
transmitter electronics enclosure.
Configuration
January 2023
www.emerson.com/en-us/
Engineering
83
Advertisement
Table of Contents
