Table of Contents
Advertisement
Reference Manual
Section 4
4.1
Overview
The information in this section covers verification considerations. A Quick Start Guide is shipped with
every 56WM to describe basic installation and startup procedures.
4.2
Safety
Instructions and procedures in this section may require special precautions to ensure the safety of
the personnel performing the operations. Information that potentially raises safety issues is
indicated by a warning symbol (⚠). Refer to the following safety messages before performing an
operation preceded by this symbol.
WARNING! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
This product must only be installed or serviced by qualified electricians following safe electrical work
▪
practices.
Installers and servicers of this device are responsible for conformance to all applicable codes, including
▪
NFPA 70E in the USA, and local codes.
Installers and servicers are responsible to confirm, with an appropriately rated voltage sensing device,
▪
that all power has been removed prior to installing or servicing this device.
This product must be installed inside a suitable fire and electrically rated enclosure.
▪
Do not install this device in a hazardous or classified location.
▪
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
This device may not cause harmful interference.
▪
This device must accept any interference received, including interference that may cause undesired
▪
operations.
This device must be installed to ensure a minimum antenna separation distance of 20 cm from all persons.
▪
Verification
December 2017
27
Advertisement
Table of Contents
Troubleshooting
