Danfoss WS103 User Manual page 25

User Manual
WS103 Remote Solution
WS Wireless configurator
© Danfoss | July 2016
If DHCP mode is Disabled, only the configured static address information is used for all devices connected
on WS103_Network wireless network.
Hostname
Hostname is a simple name for the device in a network. It is not the name for the network (see SSID in
WLAN settings on page 22), instead it is the name for the device. For example, this name is displayed in
the WLAN device list of the application that could be developed for smart devices.
IP address
This is the static IP address of WS103. This setting is used if DHCP mode is disabled or DHCP is in server
mode.
Port number
This is the local port opened for communication.
Network mask
This is the static Network mask for determining the local subnet. This setting is used if DHCP mode is
disabled or DHCP is in server mode.
Gateway address
The gateway address is necessary to address another device outside of the device's subnet. It is typically
the IP address of the access point in infrastructure mode. This setting is used if DHCP mode is disabled or
DHCP is in server mode.
DNS server
This is the IP address of the DNS server, which is required when addressing remote devices by host name
instead of IP address.
The WS103 does not have an internal DNS server, so an external DNS server is needed for host name
addressing.
This setting is used if DHCP mode is disabled or DHCP is in server mode.
AN00000339en-US0101 | 25