Can Receive Configuration - Danfoss WS103 User Manual

User Manual
WS103 Remote Solution
WS Wireless configurator

CAN Receive configuration

© Danfoss | July 2016
•
Transmit: 0x5A1, 0x721
By default, Keep the CANopen stack active while connected is not checked.
Selecting parameter Enable boot-up message enables WS103 to send a CAN message at every boot-up,
by default it is not checked.
Enable boot-up message
This parameter enables WS103 to send a CAN message at every boot-up, by default it is not checked.
It is possible to define the CAN message received by WS103.
Display Format
The values of Mask and CAN Identifier can be shown in decimal or hexadecimal format. By default it is
set to hexadecimal.
CAN ID Format
Set the input format for CAN receive objects. J1939 option can provide a more convenient way to
configure CAN received object using PGN values. By default CAN ID Format is set to Layer 2.
WS103 doesn't support J1939 transport protocol.
AN00000339en-US0101 | 21