Mxp 37 Pipe; Technical Data; Main Circuit Diagram; Gas Valve Y001 - Kemppi FASTMIG X 450 Service Manual

MXP 37 PIPE

TECHNICAL DATA

FastMig MXP 37 Pipe
Operating voltage
Rated power
Output 40 °C
Wire feed speed
Wire feed mechanism
Diameter of feed rolls
Filler wires
Wire spool
Gun connection
Operation temperature range
Storage temperature range
EMC class
Degree of protection
Degree of protection
Weight
FastMig MXP 37 Pipe is a wire feeder designed for demanding professional use and intended for 300 mm wire spool. It can be
used with both FastMig X and FastMig Pulse power sources. The special PipeRoot welding process is possible with FastMig X
power source only.
There are two versions of MXP 37 Pipe feeder; Steel and Stainless. Stainless version has pulse-MIG and also some stainless
welding curves with it and Steel version has not those. MXP 37 Pipe wire feeder has own panel XF37.

1. MAIN CIRCUIT DIAGRAM

MXP 37 Pipe wire feeder consists of several circuit cards and separate components.

1.1. Gas valve Y001

Electromagnetic gas valve operating voltage is +24V. FET V34 is switched on and off with an appropriate frequency
•
and pulse width resulting +24V operating voltage to gas valve

1.2. Spool space heater (optional)

Wire feeder's spool space can be heated if wire feeder is operating in cold or wet conditions. Maximum power for
•
heating element is 50W (50V, 1A). There is no control circuit for heating element so the heating element is always on
when wire feeder's supply voltage is connected
Kemppi OY
SERVICE MANUAL
FASTMIG X
50 V DC
250 W
60 % ED 520 A
100 % ED 440 A
0.5 – 25 m:min
4-roll, two motors
32 mm
ø Fe, Ss 0.6 – 2.0 mm
ø Cored wire 0.8 – 2.4 mm
ø Al 0.8 – 2.4 mm
max. weight 20 kg
max. ø 300 mm
Euro
-20...+40 °C
-40...+60 °C
A
IP23S
13.1 kg 590 x 240 x 445 mm
13.1 kg
20 (37)