Esc+2D32 Micro Qr Code - SATO LC400e Series Programming Reference Manual

10.12 2-D Code
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

10.12 ESC+2D32 Micro QR Code

Micro QR Code
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
Specifying QR Code (Micro QR Code)
[Format] (Setup part)
<2D32>,a,bb,c
●Parameter
a [Error Correction Level]
b [Size of one side of cell]
* Recommend to specify more than 2 dots in the 8 dots/mm and 12 dots/mm for scanner readability.
c [Data setup mode
[Format] (Dat part)
Manual setup (Data setup mod)
<DS>k,n~n
<DN>mmmm, n~n
Automatic setup (Data setup mode)
<DN>mmmm, n~n
●Parameter
k [Input mode]
* There is binary specification other than above, but data specification command is different.
m [Number of data]
* Specify when specifying Automatic setup in Data setting mode.
n [Print data]
[Supplementary Explanation1]
1. When specifying Kanji in <DN>, specify size that is 2 X number of Kanji characters.
2. For <DN> in Automatic setup, when 80H to 9FH and E0H to FFH is specified as data, it is handed as Kanji mode, and cannot
specify them as binary.
3. Set by manual setting when mixing binary, alphanumeric and kanji. You cannot set it by Auto settings.
[Coding Example1] Error correction level :7%, Size of one side of cell:04
<A>
<V>100<H>200<2D32>,L,04,0
<DS>1,012345
<Q>2
<Z>
[Supplementary Explanation2]
1. If the parameter other than the description is specified or number of print data is not match, print is not executed.
2. Data specification command in data part varies according to parameter setup or specified data.
M-8400RVe CL608e/612e
M-84Pro-2/3/6
2D32
<32> <44> <33> <32>
16 16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
= L : 7%
M : 15%
Q : 25%
= Valid Range
= 0 : Manual setup
1 : Automatic setup
* Use when input mode specification is Numeric mode, Alphanumeric mode and Kanji mode.
* Use when specifying by binary.
* Change input mode automatically according to input data.
= 1 : Numeric mode
2 : Alphanumeric mode
3 : Kanji mode (Shift JIS Kanji)
= Valid Range : 1 to 15
= Data
M-5900RVe M-10e
LC408e/412e
Parameter
,a,bb,c
16
: 01 to 32 dots
168
ESC+2D32