13. Memory Card Command; Esc+Cc Card Slot - SATO LC400e Series Programming Reference Manual

13. Memory Card Command

13.1 Memory Card
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

13.1 ESC+CC Card Slot

ESC
HEX Code
<1B>
16
Default Value a=1
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify card slot number
[Format]
<CC>a
● Parameter
Card slot specification change by setting "Card Slot 1" from LCD card mode.
Set{MEM SELECT(CC1)}to{CARD}
a {slot number}
Set{MEM SELECT(CC1)}to{MEMORY}
a {slot number}
[Coding Exaple]
<A>
<CC>1
<GI>H003003001FF000000~000000FF
<Z>
[Supplementary Explanation]
1.Card slot specification shall be specified when command is specified against memory card. However, when it is Expandable Memory
Specification <EX>, card slot specification does not required.
2.Read / Write error occurs if card is not inserted.
3.Be aware of the time consuming on card access when{Flash ROM}card is used.
4.LC 408e/412e has no memory card slot. Please specify {Flash ROM} with Card Slot Specification <CC>.
M-8400RVe CL608e/612e
M-84Pro-2/3/6
Card Slot
CC
<43> <43>
16 16
The set parameter is not maintained
The set parameter is valid until the next specification is done.
The set parameter is valid until the next specification is done.
1 : card slot
2 : flash ROM
1 : flash ROM
2 : card slot
M-5900RVe M-10e
LC408e/412e
ESC+CC
Parameter
a
230