Esc+2D31 Qr Code (Model 1) - SATO LC400e Series Programming Reference Manual

10.11 2-D Code
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se

10.11 ESC+2D31 QR Code (Model 1)

QR Code (Model 1)
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range &
When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
Specifying QR Code (Model 1)
[Format] (Setup part)
<2D31>,a, bb, c, d(,ee, ff, gg)
●Parameter
a [Error Correction Level]
b [Size of one side of cell]
* Recommend to specify more than 2 dots in the 8 dots/mm and 12 dots/mm for scanner readability.
c [Data setup mode
* Note: You need to change the method of specifying print data with this setting.
d [Concatenation mode]
Following parameter must be specified when specifying 1 (Concatenation mode) in Concatenation mode.
Omit following parameter in normal mode.
e [Number of partitions of concatenation mode]
* Number of partitions:
mode.
f [Sequential number partitioned by concatenation mode]
* Sequential number:
g [Concatenation mode parity data]
* Parity data: Specifying exclusive OR of all the print data in divided QR code with HEX characters.
[Format] (Data part)
Manual setup (Data setup mod)
<DS>k,n~n * Use when input mode specification is Numeric mode, Alphanumeric mode and Kanji mode.
<DN>mmmm, n~n * Use when specifying by binary.
Automatic setup (Data setup mode)
<DN>mmmm, n~n * Change input mode automatically according to input data.
●Parameter
k [Input mode] = 1 : Numeric mode
* Specify only when specifying Manual setup in Data setting mode.
* There is binary specification other than above, but data specification command is different.
m [Number of data] = Valid Range
* Specify when specifying Automatic setup in Data setting mode or specifying binary specification in Manual
setup.
n [Print data] = Data
M-8400RVe CL608e/612e
M-84Pro-2/3/6
2D31
<32> <44> <33> <31>
16 16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
= L : 7%
M : 15%
Q : 25%
H : 30%
= Valid Range
= 0 : Manual setup
1 : Automatic setup
= 0 : Normal mode
1 : Concatenation mode
Specifying how many QR code are to be concatenated divided by Concatenation
Specifying what number is it of divided QR code.
2 : Alphanumeric mode
3 : Kanji mode (Shift JIS Kanji)
: 1 to 486
M-5900RVe M-10e
LC408e/412e
Parameter
,a,bb,c,d(,ee,ff,gg)
16
: 01 to 32 dots
= Valid Range : 01 to 16
= Valid Range : 01 to 16
= Valid Range : 00 to FF
165
ESC+2D31