SATO LC400e Series Programming Reference Manual page 166

Hide thumbs Also See for LC400e Series:
Table of Contents

Advertisement

[Supplementary Explanation1]
1. When specifying Kanji in <DN>, specify size that is 2 X number of Kanji characters.
2. For <DN> in Automatic setup, when 80H to 9FH and E0H to FFH is specified as data, it is handed as Kanji mode,
and cannot specify them as binary
3. Set by manual setting when mixing binary, alphanumeric and kanji. You cannot set it by Auto settings.
[Coding Example1] Error correction level:
Data setup mode:
<A>
<V>100<H>200<2D31>,L,05,0,0
<DS>1,012345
<Q>2
<Z>
[Supplementary Explanation2]
1. If the parameter other than the description is specified or number of print data is not match, print is not executed.
2. Data specification command in data part varies according to parameter setup or specified data.
[Coding Example 2] Error correction level:
Mixed specification of Manual setup (Data setup mode)
In Manual setup, you can proceed specifying data in specified input mode (Numeric, Alphanumeric, Kanji, Binary).
<A>
<V>100<H>200
<2D31>,L,04,0,0
<DS>3,サトー
<DN>0010,0123456789
<DS>1,123
<Q>1
<Z>
[Supplementary Explanation3]
1. Parameter part to be followed by Data part. Data part and data part should be specified in a row. When don't specify
in arow,
print result may not be secured.
7%, Size of one side of cell:
Manual setup, Concatenation mode:
7%, Size of one side of cell:
166
05
Normal
04

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents