SATO LC400e Series Programming Reference Manual page 76

8.17 Font
CL408e/412e
Printer
M-8485Se/90Se/60Se/59Se
8.17 ESC+k8 16X16 dot Vertical Text with
16 x 16 dot Vertical Text with Mixture of Half-sized,
Mixture of Half-sized, Full-sized Kanji (Valid
(Valid Specification of Shift JIS)
Specification of Shift
ESC
HEX Code
<1B>
16
Default Value NIL
Valid Range & When Power is Switched Off
Terms of
Valid Range within Items
Command
Valid Range between Items
[Function]
To specify mix specification of width 16 X height 16 dot vertical text with width 8 X height 16 dot half-sized character.
[Format]
<k8>an~n
● Parameter
a {Kanji Specification Mode} =
n {Data }
[Coding Example] HEX Character Specification of Shift JIS, horizontal direction ratio:3 times, vertical direction ratio:5 times
Data:SATO Corporation
<A>
<V>100<H>200<P>2<L>0305
<k8>H8A948EAE89EF8ED0BBC42D
<Q>2
<Z>
[[Supplementary Explanation]
1.HEX Character
2.Binary Code
3.Smoothing Function Valid Ratio
4.Highlight Fucntion Valid Ratio
[Point]
1.For the highlighting function, the horizontal width of characters increase if follow the enlargement specification.
2.If highlighting function is used, be aware as there might have smearing problem occurs due to the characters.
3.The valid specification of 16 X 16 dot vertical text with mixture of half-sized, full-sized kanji specification <k8> is limited for Shift JIS Kanji
Code only.
4.Hafl-sized specification (character code of 1 byte) is printed out at size of 8x16 dot.
5.Full-sized specification (character code of 2 byte) is printed out at size of 16X16 dot.
6.Half-sized character has no relation with Kanji Gothic Style Specification <KG>, it is printed out by Mincho Style.
7.This command can be used only when option Kanji ROM is installed.
[NOTE]
1. When characters with a sonant mark/half sonant mark at half-sized specification is choosen, characters and part of sonant mark/half
sonant mark turns out to be different printing.
Example: if{ﾊﾞｰ}is specified, it comes out with{ﾊ}{ﾞ}{-}.
[Valid Command]
Print Position
<V>
Modification
<P>
M-8400RVe CL608e/612e
M-84Pro-2/3/6
Full-sized Kanji
JIS)
k8
<6B> <38>
16 16
The set parameter is not maintained
The set parameter becomes invalid
The set parameter becomes invalid
H : HEX Character Specification
B : Binary Code Specification
I : with smoothing function based on HEX
C : with smoothing function based on binary code
J : with highlighting function base on HEX
D : with highlighting function based on binary code
K : with smoothing and highlighting function based on HEX
E : with smoothing and highlighting function based on binary code
= Refer to Shift JIS Kanji Code Table
= Kanji Code 4 byte ASCII/Kanji 1 character
= Kanji Code 2 byte/Kanji 1 character
= Horizontal, Vertical
= Horizontal, Vertical
<H>
<L> <%> <&>
M-5900RVe M-10e
LC408e/412e
Parameter
an~n
valid range : 3~12 times
valid range : 1~5 times
ﾊ
ﾞ
-
<WD>
</> <0>
76
ESC+k8