Normally it is used only as number registration, by specifying the size of Window's vertical as well as horizontal direction, enables it to move by
Print Vertical Position Specification <V> and Print Horizontal Position Specification <H> during re-call. If register area exceed the print area
because of the moving during re-call, the exceeded portion will not be printed out.
The moving details are shown as the following:
(1)Normal Specification (to register)
<A>
<V>100<H>100<P>2<L>0202
<XM>ABCD
<V>60<H>60
<FW>0808V800H400
<V>320<H>60
<FW>04H400
<CC>1
<&S>,1
<Z>
(2)When print specification is found after <&S>
<A>
<V>100<H>100<P>2<L>0202
<XM>ABCD
<V>60<H>60
<FW>0808V800H400
<V>320<H>60
<FW>04H400
<CC>1
<&S>,1
<V>200<H>100<OB>12345
<Z>
(3)When Window size is specified
Label Size Specification <A1> 800400, Window Horizontal Direction Size{200}, Vertical Direction Size{200}
<A>
<A1>800400
<V>100<H>00<P>2<L>0202
<XM>ABCD
<CC>1
<&S>,1,200,200
<Z>
Printing which is done before specifying <&S>
will be registered as Form Overlay.
Print
Only this area will be registered
A
B
C
D
200 dot
200 dot
400 dot
234
Register image
ABCD
800 dot