Lenovo ThinkServer sd350 Installation And Service Manual page 42

2. Any system-board switch or jumper block that is not shown in the illustrations in this document are
reserved.
3. If there is a clear protective sticker on the switch blocks, you must remove and discard it to access
the switches.
SATADOM power jumper
(JP136)
Clear CMOS jumper
Figure 11. Location of the switches, jumpers, and buttons on the system board
The following table describes the jumpers on the system board.
26
Lenovo ThinkServer sd350 Server Type 5493, Lenovo ThinkServer n400 Enclosure Type 5495Installation and Service Guide
4
3
2
1
3
2
1
Switch block 1 (SW1)
8
7
6
5
4
3
2
1
ON