Lenovo ThinkServer sd350 Installation And Service Manual page 51

This page shows you the system information, include UEFI firmware version, build time and the system
Date / Time were being set. This page also includes 2 sub-mainus below:
– Processors
Select this choice to view or change the processor settings.
– Memory
Select this choice to view or change the memory settings.
• Advanced
– AST2400 Super IO Configuration
Select this to enter Super IO next configuration page.
– Upper IO chip
Enter this page you can view the Super IO Chipest information.
– Serial Port 1 Configuration
Enter this page you can Enable/Disable Serial Port of this Super IO.
– Serial Port Console Redirection
Select this to enter the Super IO Console Redirection sub configuration page or view Windows
Emergency Management Service ( EMS ) Console Redirection setting.
– Console Redirection Settings
Select this to view the overall settings.
– Legacy Console Redirection Setting
– Console Redirection Settings
– PCI Subsystem Settings
Select this to view or change the PCI Devices common settings.
– Network Stack Configuration
Select this to view or change Network Stace IPV4 and IPV6 PXE Support settings.
– CSM Configuration
Select this to view or change CSM Support and Netwrok, Storage, Video, Other PCI devices legacy
support.
– Infor Report Configuration
Select this to view or change POST Report and Summary Screen settings.
– iSCSI Configuration
Select this to Add, Delete or Change an iSCSI Initiator Name or Attempt.
• IntelRCSetup
– Processor Configuration
Select this choice to view Processor common settings or change the dedicate processor settings.
– Per-Socket Configuration
Select to view or change CPU 0 or CPU 1 Configuration.
– Advanced Power Management Configuration
Select this to view or change Intel Chipset Power Management Configuration.
– CPU Pstate Control
– CPU HWPM State Control
– CPU C State Control
.
Chapter 2 Configuration information and instructions
35