Installing The Shipping Brackets Kit - Lenovo ThinkServer sd350 Installation And Service Manual

Figure 19. Removing the four M6 screws
Step 4. Remove the four (two on each side) C-clips from the rack on the rear of the chassis.
Figure 20. Removing the four C-clips
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.

Installing the shipping brackets kit

Use this information to install the shipping brackets kit into the server.
Note: If you plan to transport the rack to another location, you must install the support brackets that come
with the chassis. You can replace the shipping brackets kit by either via "Replaceable server components"
on page 67, or you can order it as an option.
To install the shipping brackets kit, complete the following steps.
80
Lenovo ThinkServer sd350 Server Type 5493, Lenovo ThinkServer n400 Enclosure Type 5495Installation and Service Guide