Restricted Operating Menu / Layout - ProMinent DULCOMETER D1C Operating Instructions Manual

7

Restricted Operating Menu / Layout

ppm
0.45
mea. val. 0.45 ppm
70 %
fd. fwd.:
reg. val.: 59 %
w: 1.00 ppm
calibration Cl
zero p.: 4.00 mA
slope:
6.50 mA/ppm
calibration pH
zero p.: 0.0 mV
slope 25°C
59.16 mV/pH
Only with correction variable pH
correcting value
setting ?
limits
setting ?
Only with control
control
settings ?
Setting in
complete
operating
menu
general setting
information
8
Permanent display 1
Permanent display 2
only with control
(w = setpoint)
calibration Cl
DPD-value:
0.45 ppm
Only with correction variable pH
calibration pH
probe in buffer
1 !
12.00 pH
calibration pH
probe in buffer
2 !
4.00 pH
calibration pH
zero p.: 0.0 mV
slope 25°C
59.16 mV/pH
correcting value
pH
manual
4.50 pH
upper
limit 2
1.50 ppm
limit 1 lower
0.10 ppm
control
regulated value:
positive chlor
negative dechlor
control
normal
current regulat.
value: 30 %
or
control
with dead zone
current regulat.
value: 30 %
or
control
manual
current regulat.
value: 30 %
ident-code: D1CA
DxCxxxxxxxxxx
software version
D1C-A1 FW-5.00
Positive values of control variable:
Negative values of control variable:
calibration Cl
zero p.: 4.00 mA
slope:
6.75 mA/ppm
calibration pH
calib. 1 active
please wait !
33.0°C
12.00 pH
calibration pH
calib. 2 active
please wait !
33.0°C
4.00 pH
Number and scope of setting menus
is dependent on the device.
Access to setting menus can
be blocked with access code.
For normal control
setpoint
1.00 ppm
Control with dead zone
setpoint 2 upper
1.20 ppm
setpoint 1 lower
1.00 ppm
For manual control
manual dosing
15 %
regulated range
alarm relay
active
Chlorine
Dechlorine
(chlorine destruction)
calibration pH
buffer1: 12.30 pH
buffer2:
temp.: 33.0°C
calibration pH
buffer1: 12.30 pH
buffer2: 4.00 pH
temp.: 33.0°C
Proportional control
ctrl. parameter
10 %
xp =
PID control
ctrl. parameter
xp = 10 %
0 s
Ti =
Td = 0 s
5000
access c.:
operating menu:
english
=
=
reduced
D1C2-Cl-009-GB