Liability To Content; Copyright; Safety; Risk Types - TESTO CU-2 User Manual

•
any technical modification not carried out by Testo SE & Co. KGaA or an authorized
service partner.
For operating the testo MD19-3E Rotating Disk Diluter and testo ASET15-1 Air
Supply / Evaporation Tube together with testo CU-2 Digital Control Unit, refer to the related user
manuals.
2.2.1.

Liability to Content

The content of this manual is generated with most accurateness. Testo SE & Co. KGaA does not
guarantee completeness, correctness and being up to date. Testo SE & Co. KGaA reserves the
right to revise the content of the manual at any time and without notice.
2.3. Copyright ©
All work and contents done or generated by Testo SE & Co. KGaA are subject of the German
copyright © and law for intellectual property. This copyright includes all specification data of the
instrument or part of it, electrical and fluidic and mechanical schematics, pictures, diagrams and
text. Copying, editing, publishing or any other utilisation requires a written agreement of
Testo SE & Co. KGaA.
3

Safety

3.1.

Risk Types

The diagram in Fig. 3.1 shows typical risks that could cause damage or injury while handling the
testo MD19-3E Rotating Disk Diluter or testo ASET15-1 Air Supply / Evaporation Tube. These
risks may also occur if these or other devices are used in combination with testo CU-2.
Fig. 3.1: risk types
Refer to the user manuals of the devices connected to the testo CU-2 digital control unit to learn
more about the risks which may occur operating them.
3.1.1.

Electrical Safety

When in operation any electrical equipment can produce dangerous voltages. Failure to observe
the warnings may result in serious injury or damage. It is, therefore, mandatory that only suitably
qualified personnel use this instrument. Satisfactory and safe operation of this instrument calls for
proper handling in transportation, storage, installation as well as careful control and maintenance.
3.2.

Labels and Explanations

Listed labels, Caution and Warning are explained in general, and the further specific labels refer
to type of hazard and danger.
3 Safety
7