Standard Embedded Computer Ports - TESTO CU-2 User Manual

D-
sub signal description
pin
12 analog output 2
13 analog output 3
14 analog input 0
15 analog input 1
16 analog input 2
17 analog input 3
18 analog input 4
20 ground for digital in- and outputs
25 ground for analog outputs
8.4.

Standard Embedded Computer Ports

The USB ports 5)...8), the LAN connectors 10) and 11), the VGA monitor connector 12), and the
serial ports 13) 14) and16) are standard peripherals connections of the embedded computer.
However some of them are used to connect some measuring components to the system.
A TSI CPC 3010 or 37xx or EECPC 3790 or a PAH monitor PAS2000 can be attached to serial
port 1 13).
A GRIMM CPC 5.431 should be connected to USB-Port 7).
AK host computer(s) can be connected via Ethernet on the LAN connectors 10) and 11) or via
COM port 4 16).
USB storage devices may be plugged into the USB ports 5)...6) to save recorded data directly.
All other standard computer ports can be used to attach peripherals like mouse, keyboard,
monitor, and printer.
pola- analog input /
signal range
rity / digital output
+ A O 0...+10 VDC
+ A O 0...+10 VDC
– A I – 10...+10 VDC
– A I – 10...+10 VDC
– A I – 10...+10 VDC
– A I – 10...+10 VDC
– A I – 10...+10 VDC
– D 0 VDC
– A O 0 VDC
8 Electrical Connections
37