TESTO CU-2 User Manual page 33

AIKG concentration integral average calculated since the command SINT
command: AIKG K0
AIKO concentration integral average calculated since command SINT or last AIKO
command: AIKO K0
read the result of the last ZERO TEST (started by SNGA command before)
ANGA if no zero test has been done since start-up of the system, response is 'NaN'
according UN-ECE R83 the number concentration must be < 0.2 #/ccm
command: ANGA K0
read the result of the last LEAK TEST (started by SLEC command before)
if no leak test has been done since start-up of the system, response is 'NaN'
ALEC
according UN-ECE R83 the number concentration must be < 0.5 #/ccm
command: ALEC K0
response: AIKG E CCC RRR FFF
E: error status 0...9
CCC: particle concentration corrected to std.
cond. [#/ccm]
E-format: example: '3.26E3' = 3'260 #/ccm
response is not affected by stopped disk
rotation
RRR: concentration CCC multiplied by PCRF
E-format: example: '3.26E5' = 326'000 #/ccm
if disk rotation is stopped, response will be 'NaN'
FFF: particle concentration reduction factor
PCRF format: floating point example: '100.0'
if disk rotation is stopped, response will be 'Inf'
response: AIKO E CCC RRR FFF
E: error status 0...9
CCC: particle concentration corrected to std.
cond. [#/ccm]
E-format: example: '3.26E3' = 3'260 #/ccm
response is not affected by stopped disk
rotation
RRR: concentration CCC multiplied by PCRF
E-format: example: '3.26E5' = 326'000 #/ccm
if disk rotation is stopped, response will be 'NaN'
FFF: particle concentration reduction factor
PCRF format: floating point example: '100.0'
if disk rotation is stopped, response will be 'Inf'
response: ANGA E CCC MMM
E: error status 0...9
CCC: corrected particle concentration [#/ccm]
E-format: example: '0.05E0' = 0.05 #/ccm
MMM: duration in minutes since zero test has
been done
format: integer example '125' = 125 min
response: ALEC E CCC MMM
E: error status 0...9
CCC: corrected particle concentration [#/ccm]
E-format: example: '0.08E0' = 0.08 #/ccm
MMM: duration in minutes since leak test has
been done
format: integer example '125' = 125 min
7 AK Host Operation
33