Declaration Of Warranty; Type Of Designation; Manufacturer; Warranty - TESTO CU-2 User Manual

1 Declaration of Warranty

1 Declaration of Warranty
Manual Version History:
Version: V1.03
Date: November 2018
1.1.

Type of Designation

This user manual refers to the instrument and software type and version as listed below. It
replaces all previously dated user manuals for this instrument.
Type: testo CU-2
1.2.

Manufacturer

Testo SE & Co. KGaA
Testo-Strasse 1
79853 Lenzkirch
Germany
For technical support contact your local service contractor or Testo techsupport.
email: support-nanoparticle@testo.de
1.3.

Warranty

Testo SE & Co. KGaA warrants that this product adheres to the specified properties for a period
of twelve (12) months from the date of delivery.
Excluded from the warranty are all parts subjected to normal wear as any fuses, batteries or
other consumable parts. Also excluded are: Defects resulting from abnormal use, in particular
outside the intended purpose; lack of maintenance; improper use or malicious damage. Warranty
is void if actions are carried out which are not described in the documentation nor authorized by
Testo SE & Co. KGaA.
Testo SE & Co. KGaA does not provide any warranty on finished goods manufactured by others.
Only the original manufacturer's warranty applies.
There are no user-serviceable parts inside testo CU-2 and some very sensitive parts. Do not
open your testo CU-2, as you may damage it. Warranty is voided if the case is opened and
warranty-seal is broken.
Parts repaired or replaced as a result of repair services are warranted to be free from defects in
workmanship and material, under normal use, for 90 days from the date of shipment.
2

Precautions

2.1.

Foreword

This manual guides you through the installation, starting up, operation and maintenance
procedures of the testo CU-2. In detail you will find information about the system as
•
safety
•
functionality of the testo CU-2, technical information and specifications
•
installation of the testo CU-2 and accessories
•
handling, operation, maintenance and troubleshooting
Follow the instructions provided by this manual for safe and proper operation of the testo CU-
2 Digital Control Unit.
Before installing and operating the testo CU-2, the operator or service has to
read carefully this manual. For improper function, damages or injuries caused
by ignoring the instructions by this manual no liabilities are accepted.
2.2.

Liabilities

Testo SE & Co. KGaA accepts no liability to improper function or injury caused by
•
neglecting the instructions provided by this manual or instructed person.
•
improper installation, operation, application, or maintenance.
•
operation by untrained staff.
6
Tel: +49 7653 681 5062
Fax: +49 7653 681 95062
web: www.testo.com
email: info@testo.de