Sanken SAMCO-NS Series Instruction Manual page 55

Code Function Name Data Content
3103 PID2 control proportional 0～100
gain
3104 PID2 control integral 0.01～100 sec.
Time
3105 0～100 sec.
PID2 control dividential
Time
PID2 control integral
3106 5～100%
speparation judgement
value
3107 1～500（set value 1=10ms）
PID2 feedback signal
Input filter time constant
3108 Indirect PID2 input 5～100%（Target value reference）
Reference
0：No limit
3109
PID2 deviation limit value
1～100%
0：No limit
3110 PID2 output limit value
1～100%
1：command value-feedback value
3111 PID2 operation polarity
2：feedback value-command value
switching
1: The plus or minus deviation indicates the
3112 PID2 gain polarity
2: The plus or minus deviation indicates the
Switching
3113 PID2 command value 0～50
gain
3114 PID2 Feedback value 0～50
Gain
3115 0～100
PID2 control proportional
gain
(Negative ：F3012=2)
3116 PID2 control integral time 0.01～100 sec.
(negative ：F3012=2)
3117 PID2 control command 0～6000
Value
PID2 control feedback
3118 0～6000
value（communication
function）
（Upper frequency limit reference）
(Upper frequency limit reference
(Upper frequency limit reference
same gain
different gain
-54-
Setting Factory
resolution preset
0.01 0.1
0.01 sec. 1
0.01 sec. 0
0.1% 100
1 10
0.1% 20
0.1% 100
)
0.1% 100
)
1 1
1 1
0.01 1
0.01 1
0.01 0.1
0.01sec. 0.1
0.1 0
0.1 0