Sanken SAMCO-NS Series Instruction Manual page 26

For example: Display the disfference with the factory preset
Operation Display
【ENTER】
∧ ∨
【 】/【 】
Or digit keyboard
)
(Optional selection
【ENTER】
Or
Searching Ending
】 Or
∧ ∨
【 】/【
【PR/CL】
Description
Select function code F1602
(Changed code display function)
Press【ENTER】Key, entered into the
parameters setting condition.
Press【∧】/【∨】or digit keyboard, select 1.
F1602=1 , this will compare the factory presets with
current function code data.
Press【ENTER】key, starting to search thee function code, that
which is the value changed compared with the factory
presets.
F ind
Primary monitor 7 segments display
Searching ending, secondary monitor display the
changed code, and flashing.
No changed code found, secondary monitor display
on flashing, primary monitor show the current value for
related parameter.
Browse the page of different parameter code
and its current value through【∧】/【∨】key.
Press【PR/CL】Key, back to the selection
of function code interface.
-25-
in flashing.
End