Sanken SAMCO-NS Series Instruction Manual page 44

Code Function name Data content
0: No function
1703 Output current limit
1: Yes, V/f mode(Current acceleration/deceleration
at constant speed
time）
2: Yes, V/f mode( 1
time）
3: Yes, V/f mode(2
time）
4: Yes, V/f mode (3
time）
5: Yes, V/f mode (4
time)
6: Yes, V/f mode and speed vector control mode
(1
7: Yes, V/f mode and speed vector control mode
(2
8: Yes, V/f mode and speed vector control mode
(3
9: Yes, V/f mode and speed vector control mode
(4
1704 Overload alarm level A Mode
Setting value
20%～200%
B Mode
20%～150%
1705 Motor Type
1：General-purpose motor
2：Exclusive motor for Inverter
0："ov"enabled; "Lv"disabled when stopped
1706
Function to switch "OV"
1："ov"disabled; "Lv"enabled when stopped
And "LV" alarms when
2："ov"disabled; "Lv"disabled when stopped
stopped
3："ov"enabled; "Lv"enabled when stopped
0：No input phase loss, No output phase loss
1707 Missing phase detection
1：Input phase loss, No output phase loss
Function
2：No input phase loss, output phase loss
3：Input phase loss, output phase loss
0：No overvoltage stalling prevention functions
1708 Overvoltage stalling
1：Overvolatage stalling prevention functions
prevention functions
0：Only warning
1709 Feedback signal
0.01～119.99 sec.
disconnection detection
120：No disconnection detection
time
st
acceleration/deceleration
nd
acceleration/deceleration
rd
acceleration/deceleration
th
acceleration/deceleration
st
acceleration/deceleration time)
nd
acceleration/deceleration time)
rd
acceleration/deceleration time)
th
acceleration/deceleration time)
-43-
Setting Factory
resolution preset
1 0
1% 150
1% 120
1 1
1 0
1 3
1 1
0.01sec. 5