Monitor Display List - Sanken SAMCO-NS Series Instruction Manual

1：Display name as below:
※
Display Content
Alarm Name
Output Frequency
Output current
Output Voltage
Dc Voltage
Output Power
Radiator Temperature
※2 The value displayed is the status before the occurrence of an alarm. Therefore, if an alarm is caused by transient over-current, over
voltage he stored value is the different from the current value、voltage value on the alarm.

Monitor display list

Monitor Display
The Data is on flashing during initialization.
During initialization of user data, the data is displayed flashing.
The data is on flashing on the confirmation of user data.
Display shown that needs to reconfirm the operation by function code.
During search of the function code, of which user data is discrepant from
the default settings, the display is on flashing status.
The display is flashing during the trasfer of host function code data to the
operation panel.
During the trasfer of the operation panel function code to host, it is displayed flashing.
It is displayed flashing, while the desired data can't be found through the function code
search and alarm history record.
Indicates auto turning.
Unit
-
Hz
A
V
V
kW
℃
Description
-27-