Sanken SAMCO-NS Series Instruction Manual page 33

Code Function Name Data Content
1103 Starting frequency 0.05～60Hz
1104 Operation start frequency 0～20Hz
1105 Start delay time 0～5 sec.
1106 Start standby time 0～120 sec.
1107 Start standby frequency 0.05～60Hz
0: Do not start
1108 Restart after momentary
1: Restart
Power failure
2: Compensation for momentary power failure
1：Forward and reverse run
1109 Direction of rotation of
2：Forward run only
Motor
3：Reverse run only
1110 Direction of rotation of
1：Forward
Motor (Setting through
2：Reverse
Operation panel)
1: Deceleration to stop
1111 Braking method
2: Deceleration to stop + DC braking
3: Free run stop
4: Deceleration to stop + continuously DC braking
1112 DC braking start frequency 0.05～20Hz
1113 DC braking time 1～25 Sec.
1114 DC braking force 1～10
0: No brake resistor
1115 Duty cycle of brake resistor
98: No discharge resistor protection
99: External brake unit
1116 Discharge resistor on signal 0.01～10.00 sec.
Output time
0：Braking invalid
1117 Parameters setting
1：Braking Valid
Continuously DC braking
2：Valid for braking time
2～25%ED
(with discharge)
-32-
Setting Factory
resolution preset
0.01Hz 1
0.01Hz 0
0.1sec. 0
0.1sec. 0
0.01Hz 5
1 0
1 1
1 1
1 1
0.01Hz 0.5
0.1 Sec. 2
1 5
1%ED 1
※
0.01sec. 0.1
1 1