Control Panel; Switching On The Machine; Switching Off The Machine; Drill Depth - Optimum OPTi drill D 17Pro Operating Manual

4.2

Control panel

Push button ON
The push button "ON" switches on the rotation of the drilling spindle.
Push button Off
The "push button OFF" switches the rotation of the drilling spindle off.
Direction of rotation selector switch
only on
D23 Pro - 400V

D26 Pro

D33 Pro

4.3

Switching on the machine

INFORMATION
The machine cannot be started, if the drill chuck guard is not closed.

Adjust the speed.

Plug in the power supply.

Set the height of drill chuck guard and close the drill chuck guard.

If available on the machine, select the direction of rotation (zero position of direction of rota-
tion).

Actuate the push button "ON".
4.4

Switching off the machine

CAUTION!
Only press the emergency-stop button in a genuine emergency. You should not use the
emergency stop button to stop the machine during normal operation.

Actuate the push button "OFF".

Pull the plug for a longer-term standstil.
4.5

Drill depth

4.5.1

Drill depth stop


Loosen the clamping screw and turn
the scale ring to the desired drilling
depth.

Tighten the clamping screw again.
The spindle can only be lowered to the set
value.
or
set the digital readout to "zero" to read the
drilling depth.
Operation
Version 1.0.3 - 2022-04-06
Clamping screw
Scale
Img. 4-2:
Translation of original instruction
Scale of drill depth stop
D17 Pro│D23 Pro│D26 Pro│D33 Pro
R
EN
35